Vacuum emulsification machine is a shear mixing machine that conbines high-speed emulsion and mixing, the device is widely used in cosmetic, pharmaceutical, fine chemicals,dairy foods industry, its main function is to make neutral particles or fibers. Through a special cut, changed into smaller molecules in order to meet the technical requirement. The particles are very small through High-speed operation, The effect of emulsion depends on the quality of its preparation phase, the particle size and method of spreading. The smaller of the particles, the weaker of the trend of gathering on the surface, so as to reduce the damage rate. Through the mixed movement of The pros and cons rotating blades, homogeneous and turbine vacuum, it obtains high-quality emulsion mixed effects.
Machine size (length X width X high-X high-General): 3540X3100X2670X3800mm.
Emulsifying agitating pan (the main pan): Volume 500L, material SUS316L, steam heating, water cooling.
The main structure of the main pan: top and bottom sealing,top sealing connecting to the beam, bottom sealing linked to the Pan.
Pan(three-tier structure): SUS316L liner material.the thickness 6mm,300MESH (health class) outside polishing.
Jacket: SUS304 material. the thickness: 4mm. the design of pressure: 0.3mPa.work pressure:0.1mPa.
Insulation jacket: material SUS304, the thickness 2mm, inside suboptical polishing.
All are polished after welding line and burnishing; insulation layer using PU polyurethane foams technology.
Agitation equipment of the main pan:
High-speed shear homogeneous emulsion: Power 7.5Kw, speed 0 ~ 3200r/min (Frequency);
Return flow agitating valve: Power 2.2Kw, speed 0 ~ 70r/min (Frequency);
Agitating Motor: Speed 0 ~ 70r/min (Frequency).
Main pan nozzle: feed inlet,  vacuum grip inlet, asepsis pressure vent valves, viewing mirror with light and fog brush, temperature sensors, ball washers, air-powered discharge port bottom valve, pressure gauge, subpressure pressure sensors and other devices.
Hydraulic system: fuel box, the fuel tank, electromagnetic valve, spillover valve, hydraulic control valve and other structure.
Vacuum system: Vacuum Pump Model: 2BV2070, inspiratory volume 82m3 ³ / h, electric power 2.45Kw
Electric Control System: electrical apparatus components using snide products, Japan's Matsushita Electric converter, instrumentation, sensors, temperature controller and other domestic high-quality products, Taiwan Wei-lun touch-screen (requirement of the users).
Seal: the main pan cover using silicone rubber packing, others use skeleton oil or mechanical sealing element to seal.
Pre-pot (oil, water pot): volume of oil pan 250L, volume of water pot 300L, steam heating, cooling water;
Structure (three-tier structure): Semi-open-cover, pan installed on a rack; with scattered shear agitating valve and temperature-controlled instrument, and other devices;
Liner: SUS316L material, the thickness 6mm, inside polishing 300MESH (health class);
Jacket: SUS304 material, the thickness 4mm;
Insulation jacket: SUS304 material, the thickness 2mm, outside polishing Ra0.28μm; Insulation layer using PU polyurethane foams technology;
Agitating Motor: power 1.5Kw, speed 960r/min.